Ready-made 3D printed products — ship in 3 days.

Fiamma bike rack rail end cap part number : 98656-079 rail end cap "Quick Rail" These end caps are tapered just like the original so they are easy-on and then lock into position. See the last photo and double check the size of the part you require is the same as the one I am selling. These will not fit the premium or deluxe versions. BUY - knowing this is a tried and tested fit for your bike rack CHECK THE PHOTOS AND ASK FOR CLOSE-UPS BEFORE BUYING! All 3d printed in red PLA. (Bio degradable) There will be some variations in colour shades between rolls of filament but however many you buy, they will all be from the same roll and therefore the same shade of red. Of course I can do different colours, please message before buying to check I have that colour option available for you. You will receive 2 caps to suit 1 rail

Replace lost or damaged bike rack rail end caps with these precision-engineered 3D-printed replacements designed for 61.7mm Fiamma bike carrying rails. Featuring an accurate internal taper, these caps glide on easily and lock firmly into position for a secure, rattle-free fit on the road. Key Features & Engineering Details Precision Tapered Lock: Custom-engineered internal taper ensures smooth slip-on installation and a firm locking fit onto the rail profile. 30+ Years Engineering Quality: Designed from scratch and printed to exact dimensional tolerances for a smooth, high-quality surface finish. Standard 61.7mm Rail Fit: Designed specifically for rails measuring 61.7mm wide. (Please verify your rail width with calipers or a ruler prior to ordering). Color-Matched Pairs: Printed in high-density Red PLA thermoplastic. Every pair is manufactured from the same filament batch to guarantee exact color consistency across your rack. Custom Colors Available: Standard in Red. Alternative colors (Black, Grey, White) are available upon request (please message prior to ordering to check stock). Specifications & Compatibility Compatible Bike Racks: Fiamma Carry-Bike rail profiles measuring 61.7mm wide Rail Width: 61.7mm Material: PLA Thermoplastic Standard Colour: Red Package Includes 2x Tapered Rail End Caps (1 Pair for 1 Rail) ⚠️ Dimensional Check: Please measure your aluminum rail width before purchasing to ensure compatibility. This listing is specifically for the 61.7mm wide rail profile. Looking for Omni-Bike or 64.75mm rail end caps? Check our store listings for other sizes and custom fittings!

Replace lost or cracked bike rack end caps with these precision-engineered, 3D-printed rail end caps designed specifically for Omni-Bike carrying rails. Engineered with an accurate taper for an easy-on installation that locks firmly into position on the rail profile. Key Features & Engineering Details Precision Tapered Lock: Features a custom-modeled internal taper designed for effortless alignment and a snug, vibration-resistant locking fit. Engineer-Designed Quality: Modeled from scratch and printed to strict tolerances for a smooth, dimensionally accurate surface finish. Standard 64.75mm Width: Designed to fit rails measuring 64.75mm wide. (Please measure your rail width prior to ordering to ensure exact compatibility). Durable Construction: Printed in high-density Red PETG thermoplastic. Color-Matched Pairs: All pairs are printed from the same filament batch to guarantee consistent color matching across your rack. Specifications & Compatibility Compatible Bike Racks: Omni-Bike / Thule Omni-Bike rail profiles (64.75mm width) Rail Width: 64.75mm Standard Colour: Red Material: PETG Thermoplastic Package Includes 2x Tapered Rail End Caps (1 Pair) ⚠️ Dimensional Check: Please measure your aluminum rail width before purchasing. Standard Omni-Bike rails measure 64.75mm across the end profile. Need an alternative color (Black, Grey, White) or custom sizing for Fiamma or other rack profiles? Please contact us prior to ordering to confirm material availability!

VW Transporter T5 Cup Holder for your coin tray. May fit others - buyer to confirm fitment These "Click Fit" into place and are very sturdy. They are easily removed without any damage though. 3D Printed in any colour you can think of. I have rainbow filament but this varies in colour depending on where it is in the roll so would be pot luck on the colours you would get. Get in touch, let me know what you would like. You will receive 1 holder and 2 cups in the colours you have chosen. If there is no colour listed for you, get in touch and I'll see what I can do. Designed to fit/hold many different types of cup. I've tried (as have my testers) all the cups we can find and they fit either as-is with the cup inserts in place or if you take them out you can hold much larger cups. If you have ANY special requirements, get in touch, I'll see what I can do. My aim is for you to be 100% satisfied. If you are not completely satisfied with your purchase please do not hesitate to contact me; I will do my very best to resolve any issues. If goods were sent out as ordered, the buyer is responsible for any return postage.

Fix your snapped VW Transporter T5 dash cup holder without paying hundreds for an entire replacement assembly. Engineered specifically to restore the bottom pivot points, this 3D-printed repair hinge set bonds directly onto the prepared original cup holder mount, getting your cup holder opening and closing smoothly again. Key Features & Engineering Details 100% Original CAD Design: Engineered from scratch to reinforce and replace the weak factory plastic hinges—not a copied web model. Cost-Effective OEM Fix: Repairs broken lower hinge lugs directly on your existing cup holder mechanism without replacing the full dashboard console. Precision Aircraft Engineer Quality: Modelled and printed in-house to high dimensional tolerances for exact fitment and smooth pivot action. Durable Black Finish: Supplied in Black thermoplastic as standard to blend seamlessly with your T5 interior trim. (Yellow shown in photos is for feature highlighting only). Specifications & Vehicle Fitment Compatible Vehicles: Volkswagen Transporter T5 (Standard dash cup holder assemblies) Material: High-density engineered thermoplastic Standard Colour: Black Pack Contents: 1x Left Hinge Mount & 1x Right Hinge Mount (1 Pair) Step-by-Step Fitting Instructions Trim Damaged Plastic: Using a fine saw blade, saw straight down keeping as close to the side as possible on both sides of the damaged cup holder hinge. File Flush: Clean up remaining plastic around the central shaft axis using a small file. This forms the flat seating face for your replacement hinge. Dry Fit Check: Test fit the replacement hinge onto the shaft axis (without the spring). File away additional plastic until the hinge rotates smoothly with zero resistance. Bond in Place: Apply a thin, even layer of epoxy adhesive (recommended for a clean finish) or CA superglue to the mating face and hold the new hinge mount in position until cured. Reassemble: Once fully cured, refit your original springs, reassemble the cup holder mechanism, and reinstall into your dash. ⚠️ Please Note: Adhesive (epoxy/superglue), springs, and the main cup holder tray assembly are NOT included. Basic prep work (sawing/filing) is required for installation. Need other custom VW T5 / T6 interior clips, brackets, or repair parts? Message us directly—we are always developing custom van hardware!

Permanently Fix Your Broken Cup Holder — Without Replacing the Entire Assembly A broken cup holder hinge doesn't mean you need to buy an expensive replacement console or assembly. This custom-engineered repair kit provides a clean, permanent fix that restores your cup holder's smooth folding action while keeping the original aesthetic completely intact. Proudly designed from scratch using precise CAD modeling (this is an original design, not a cheap copy), these components are built to match the exact geometry of your factory hardware. Key Features Original CAD Design: Precision-engineered specifically for a flush, factory-like fit rather than a generic universal workaround. Non-Obtrusive Fix: Repairs the broken mechanism directly without covering up or altering the look of your original cup holder. Complete Pair: Supplied as a complete 1-set package containing both upper left and right side components. Trusted Quality: Backed by proven real-world durability and strong customer feedback. What’s Included 2x Top Repair Components (Left & Right Side Set) Please Note: This listing is for the 3D-printed repair hinges only. It does not include pins, springs, or the original cup holder assembly (re-use your existing springs and pins). Quick Installation Guide For a full visual walk-through, please watch the installation video guide linked below. Trim: Saw down carefully, keeping the blade as close to the side as possible on both sides of the broken cup holder hinge. File: Remove any remaining material around the shaft axis with a small file. The replacement part will seat against this area. Dry Fit: Check the fit of the new component using just the hinge (leave the spring off for now). If you feel resistance, file a bit more from around the shaft axis until it creates a smooth blend to the top. Bond: Apply a very thin layer of epoxy adhesive for a clean, professional finish (or superglue for a quick bond), then press the new hinge mounts into place. Reassemble: Once fully cured, re-assemble your cup holders using your original springs and pins. 👉 Watch the Step-by-Step Installation Video Here (Copy and paste the link into your browser if needed) Our Satisfaction Guarantee We want you to be 100% satisfied with your purchase. If you have any questions or run into any issues during installation, please reach out—we are always happy to help!