Ready-made 3D printed products — ship in 3 days.

Mounting accessory only. No thermostat, batteries, or electronics are included. Easily relocate your Hive Active Mini Thermostat around your home without unmounting its original backplate. This custom 3D-printed wall dock allows you to leave your wired/main backplate fixed to the primary wall location while giving you a second, quick-slot mounting point in another room whenever you need to monitor temperature elsewhere. Key Features & Design Drop-In Convenience: Designed to hold your Hive Mini thermostat securely while allowing you to lift it out instantly. Single-Screw Installation: Features 1 central mounting hole for effortless alignment—drill just 1 hole into your wall using a standard 3mm screw and suitable wall plug. Leaves Main Backplate Intact: Keeps your original backplate fully protected on your primary wall. Tailored Fit: Dimensioned specifically for the Hive Mini Thermostat (85mm x 85mm x 22mm). Colour Options: 3D printed in clean White as standard. Custom colours available upon request (please message before ordering to check stock). Specifications & Dimensions Compatible Device: Hive Active Heating Mini Thermostat (85mm x 85mm x 22mm) Mounting Type: Wall-mounted dock via 1 central countersunk screw hole Material: Durable 3D Printed Thermoplastic Standard Colour: White What's Included 1x 3D Printed Hive Mini Thermostat Wall Mount Dock ⚠️ Please Note: Wall screws, wall plugs, and the Hive Thermostat itself are NOT included. Because wall types vary (drywall, brick, plasterboard), please supply a suitable 3mm screw and fixing for your specific wall type. Need a different fit, V2/V3 variant, or custom modification? Check our store listings or send us a message directly—we are happy to customize mounts for your specific setup!

Easily relocate or mount your Hive Active Heating V2 thermostat anywhere in your home with this custom-engineered wall mounting dock. Designed as a dedicated receiving bracket, this mount allows you to place your smart thermostat in alternative rooms for optimal temperature sensing and easy access. Key Features & Engineering Details 100% Original Custom CAD Design: Engineered from scratch to precise dimensions for a clean, secure rest—not a generic downloaded web model. Flexible Room Relocation: Makes it simple to move your thermostat around the house and mount it securely wherever you need control. Sleek & Low-Profile: Sized at 100mm x 100mm x 34mm to sit flush against wall surfaces while leaving controls and rear access clear. Durable Thermoplastic: Printed in clean, high-density White plastic to seamlessly complement your Hive thermostat casing. Custom Colour Options: Supplied in White as standard. Alternative colours are available upon request (please message prior to ordering to verify material stock). Specifications & Compatibility Compatible Thermostat: Hive Active Heating V2 Thermostat (Main Body Dimensions: 100mm x 100mm x 34mm excl. control knob) Mounting Type: Surface Wall Mount Dock Standard Colour: White Material: High-Quality Thermoplastic Package Includes 1x Custom 3D-Printed Wall Mount Dock for Hive V2 Thermostat ⚠️ Please Note: Hive Active Heating Thermostat, batteries, and wall mounting screws are NOT included. This listing is for the 3D-printed dock only. Looking for Hive V3 or V4 thermostat mounts, or Hive Hub wall brackets? Explore our store listings or contact us directly for custom smart home fittings!

Keep your smart home setup organized and off counter surfaces with this custom-engineered Hive Hub V2 wall mount dock. Built from durable, heat-resistant PETG, this sleek white wall bracket holds your hub securely while maintaining full access to all rear ports and keeping cable runs neat. Key Features & Engineering Details 100% Original Custom Engineering: Modeled completely from scratch in CAD for a precise, tailored fit—not a generic downloaded web model. Single-Screw Precision Alignment: Designed with a single central mounting hole so you can easily level the dock on the wall before fully tightening the screw. Durable PETG Construction: Printed in high-strength PETG thermoplastic for long-term structural integrity without warping over time. Clean & Accessible Design: Mounts flush to the wall while preserving total clearance for power and Ethernet connectors. Custom Colour Options: Supplied in clean White as standard. Alternative colours are available upon request (please message prior to ordering to check filament stock). Specifications & Compatibility Compatible Device: Hive Hub V2 / Hive Hub 2 Mounting Type: Wall-mounted dock via single central countersunk screw hole Material: PETG Thermoplastic Standard Colour: White Package Includes 1x 3D-Printed Hive Hub V2 Wall Mount Dock ⚠️ Please Note: Wall screws, rawl plugs, and the Hive Hub V2 unit itself are NOT included. Please supply a suitable screw and wall fixing for your specific mounting surface. Need a mount for the Hive Hub V3 or Hive Mini Thermostat? Check our store listings or contact us directly for custom smart home fittings!

Keep your smart home hub neatly organized and off your counter space with this custom-designed Hive Hub V3 wall mount dock. Engineered from high-strength PETG, this sleek white wall bracket holds your hub securely while keeping ports accessible and your setup clutter-free. Key Features & Design 100% Original Custom Engineering: Designed completely from scratch in-house for a perfect, snug fit—not a generic downloaded model. Single-Screw Precision Alignment: Features a single central mounting hole so you can easily level the dock before fully tightening it down. Durable PETG Construction: Printed in tough, heat-resistant PETG filament for long-lasting structural strength without warping. Clean & Accessible Setup: Mounts flush to the wall while maintaining full access to power and network ports. Custom Colour Options: Printed in clean White as standard. Alternative colours are available upon request (please message before ordering to confirm stock). Specifications & Dimensions Compatible Device: Hive Hub V3 (90mm x 90mm x 24mm) Mounting Type: Wall-mounted via single countersunk screw hole Material: PETG Thermoplastic Standard Colour: White Package Includes 1x 3D-Printed Hive Hub V3 Wall Mount Dock ⚠️ Please Note: Wall screws, wall plugs, and the Hive Hub V3 unit itself are NOT included. Please supply a suitable screw and fixing for your specific wall type. Looking for another custom mount or specific model modification? Check our store listings or contact us directly—we are always happy to help!

Keep stacked IKEA Kallax shelving units aligned and stable with custom 3D-printed connector clips. Designed specifically to utilize the factory pre-drilled holes on the rear of Kallax units, these heavy-duty brackets prevent stacked units from sliding or toppling forward. 🛠️ Precision Design & Easy Setup Factory Fit: Engineered to align directly with IKEA pre-drilled pin/screw holes for a clean, flush fit. Included Hardware: Each connector clip comes with 4x Euro screws for quick, tool-friendly installation into factory holes. Multiple Width Options: Standard stock is sized to bridge 2 x 37mm Kallax outer walls (74mm total combined thickness). Custom options for 77mm, 78mm, and 90mm widths are also readily available. Custom Sizes & Colours: If your stacked shelving needs a non-standard width or custom colour scheme, simply request your required dimensions at checkout. 📦 Package Includes 1x IKEA Kallax Shelf Connector Bracket 4x Euro Screws ⚠️ Important Safety & Usage Note: These clips are designed to assist with shelf alignment and prevent top units from shifting. They are not a replacement for standard wall-anchoring hardware. Always ensure heavy furniture is properly secured to the wall per manufacturer guidelines.

Non-Drill IKEA Kallax Shelf Stacker Connectors Secure Stacked Kallax Units Without Damaging Your Walls Stacking IKEA Kallax shelving units is a great way to double your storage, but preventing the top unit from shifting or toppling usually means drilling holes into your walls. These custom-engineered 3D-printed connector clamps provide a rock-solid, non-destructive solution. Designed to bridge and clamp adjacent shelf walls securely, they lock stacked units together without the need for wall anchors or permanent modifications. Key Features No Wall Drilling Required: Ideal for rentals, temporary setups, or anywhere you want to avoid wall damage. Precision Fit: Custom-contoured to fit snugly over two stacked 37mm thick Kallax outer walls (74mm combined total thickness). High-Grip Clamp Design: Locks the upper and lower units together to prevent shifting, sliding, or accidental tipping. Optional Screw-Mounting: Features integrated mounting points if you choose to screw the clamps directly into the shelves for maximum rigidity. Durable 3D-Printed Build: Engineered for strength, tough daily use, and a neat, low-profile finish. Important Fitting & Preparation Notes Measure Before Buying: Designed specifically for standard Kallax walls (37mm individual / 74mm paired). Please check your shelf thickness prior to ordering. Remove Felt Pads: Ensure any felt feet or buffer pads between the stacked units are removed before installing for a flush, secure clamp fit. Custom Sizes Available: Have an older Expedit unit or a different shelf thickness? Send a message with your measurements and a custom set can be made to order. Color Options: Supplied in standard colors. Custom colors are available upon request—contact us prior to ordering! What’s Included 1x Kallax Shelf Stacker Connector Clamp (Note: Photos showing 2 clips are for surface finish illustration only. Each unit is sold individually—order 2 or more for maximum stability across your shelf width). Safety Notice These clamps are designed to stabilize stacked shelving and prevent top units from sliding or shifting off the base. They are not a structural wall-anchoring safety device and will not prevent tipping if pulled on directly. Do not climb or allow children to climb on stacked units. The seller accepts no liability for misuse.

Clear Desk Space & Optimize Wi-Fi Signal Coverage Leaving your TP-Link Archer VR1210v router sitting flat on a desk, floor, or behind furniture restricts airflow, creates cable clutter, and degrades Wi-Fi signal range. Designed and manufactured in the UK by a production engineer with over 30 years of precision CAD experience, this custom-fit router wall mount elevates your router for optimal signal distribution while keeping your office or workshop organized. Engineered specifically to match the casing geometry of the Archer VR1210v, it delivers a clean, snug fit with zero wobble. Key Engineering & Practical Features Precision Custom Fit: Tailored specifically for the TP-Link Archer VR1210v router footprint—ensuring secure docking without blocking ventilation ports or cable connections. Improved Wi-Fi Performance: Mounting your router higher on a wall removes physical obstructions, boosting Wi-Fi coverage across your home, office, or workshop. Clean Cable Management: Eliminates messy desk clutter by securing the router neatly against the wall, reducing strain on power and Ethernet cables. Fast 2-Hole Installation: Features precision-spaced mounting slots spaced at 112mm centers. Simply drill two holes, insert wall plugs, and drive screws home. Industrial-Grade Construction: 3D-printed in high-density polymer for rigid, long-lasting support that easily handles the weight of the router and attached cabling. Technical Specifications & Installation Notes Compatible Device: TP-Link Archer VR1210v Router Mounting Hole Centers: Exactly 112mm (Center-to-Center) Standard Supply Color: Sleek Matte Black Manufacturing Origin: Designed & Made in the UK Easy Step-by-Step Installation Guide Mark and drill two holes in your chosen wall at 112mm centers. Insert appropriate wall plugs for your wall type (masonry, plasterboard, or timber). Align the mount and drive your screws in gently. Important Installation Note: Do not over-tighten screws with high-torque drivers. Screws only need to be snug enough to hold the mount flat against the wall. Package Contents 1x TP-Link Archer VR1210v Router Wall Mount (Note: TP-Link Router, wall plugs, and mounting screws are not included). Custom Colors Available Standard delivery is supplied in Matte Black for a clean, professional finish. Custom colors (such as White, Grey, or High-Vis Yellow) are available upon request—please contact us prior to placing your order to verify material availability.

Bring style and practicality to your home with this modern 3D‑printed wall plant hanger, designed to display your favourite hanging plants without taking up floor space. Perfect for kitchens, living rooms, hallways, offices, or anywhere you want to add a touch of greenery. Measurement from wall to hook is 13cm ✔ Strong, Lightweight & Space‑Saving This bracket is engineered for everyday indoor use and comfortably supports up to 2kg of hanging weight. While the design has been tested with heavier loads (6kg), 2kg is the recommended safe limit to prevent bracket deformation and ensure long‑term durability. ✔ Clean, Modern Aesthetic The smooth, minimalist design complements any décor style. Pair it with trailing plants, spider plants, or decorative hanging pots for an eye‑catching display. ✔ Available in Many Colours Choose a colour that matches your room or plant pot. If you need a specific colour, please message before purchasing so I can confirm availability or print one to order. ✔ Handmade in the UK Each bracket is individually 3D printed with care, ensuring a high‑quality finish and reliable performance. 📏 Specifications Material: High‑quality 3D printed polymer Recommended load: Up to 2kg Mounting: Wall‑mounted (fixings not included) Suitable for: Indoor plant pots, macramé hangers, lightweight décor items Colour options: Multiple (contact before purchase for custom colours) 🌱 Why Customers Love It Adds greenery without cluttering surfaces Lightweight but strong Customisable colours Unique handmade design Perfect for renters, plant lovers, and modern interiors

Bring style and practicality to your home with this modern 3D‑printed wall plant hanger, designed to display your favourite hanging plants without taking up floor space. Perfect for kitchens, living rooms, hallways, offices, or anywhere you want to add a touch of greenery. Measurement from wall mount to hook is either 17cm or 14cm dependant on what you select when ordering. ✔ Strong, Lightweight & Space‑Saving This bracket is engineered for everyday indoor use and comfortably supports up to 3kg of hanging weight. While the design has been tested with heavier loads (6kg), 3kg is the recommended safe limit to prevent bracket deformation and ensure long‑term durability. ✔ Clean, Modern Aesthetic The smooth, minimalist design complements any décor style. Pair it with trailing plants, spider plants, or decorative hanging pots for an eye‑catching display. ✔ Available in Many Colours Choose a colour that matches your room or plant pot. If you need a specific colour, please message before purchasing so I can confirm availability or print one to order. ✔ Handmade in the UK Each bracket is individually 3D printed with care, ensuring a high‑quality finish and reliable performance. 📏 Specifications Material: High‑quality 3D printed polymer Recommended load: Up to 3kg Mounting: Wall‑mounted (fixings not included) Suitable for: Indoor plant pots, macramé hangers, lightweight décor items Colour options: Multiple (contact before purchase for custom colours) 🌱 Why Customers Love It Adds greenery without cluttering surfaces Lightweight but strong Customisable colours Unique handmade design Perfect for renters, plant lovers, and modern interiors